--- schema_version: "1" id: c16f4906ecbce8ff993e9f407a6df004197ebc7eaa7ab74f5a752228d5bf42ae title: Verifone Payment Onboarding collection: admin version: current locale: en-us portal_url: https://docs.salesforce.com/admin/current/en-us/commerce/264-0-0/rt_cms_hardware_verifone_payment_onboarding.md canonical_url: https://help.salesforce.com/s/articleView?id=commerce.rt_cms_hardware_verifone_payment_onboarding.htm&release=264.0.0&type=5 source_site: help.salesforce.com content_type: documentation content_hash: 3df1182d43e2ca0f7991372cc84027446d5f84cfc798f59bbb678b24d8a323fb description: This article goes over the onboarding steps for using the Verifone Payments terminals with Point of Sale. products: - Commerce release: "264" --- # Verifone Payment Onboarding This article goes over the onboarding steps for using the Verifone Payments terminals with Point of Sale. Prerequisites: - Modern POS App Build: 9.1.2 and later - Platform Support: iPhone & iPad - Offline Support: no - Verifone Payments terminals model: M400 - Merchant Checklist for Point of Sale Certification - Provide Verifone Portal Access to ios@salesforce.com - Retrieve Device Admin Password and SysMode Password - Disable Line Item Display and Enable AutoPair by default at the time of terminal procurement - Ship test terminals to Salesforce ## Set up Card Reader Settings 1. Go to **CMS > Apps > Store**. 2. Edit the app configuration of your choice and then go to **Modules > Peripherals > Card Readers.** 3. Set **Default Card Reader** to "**Verifone Payments**". 4. Select **Save**. ## Set up Payment Gateway Settings 1. Go to **CMS > Advanced > Payment Gateways**. 2. Create a Payment Gateway configuration for **VERIFONE\_PDSK** and keep the default values as is. 3. Save your changes. ## Verifone Terminal - Configuration & Setup Configure your Verifone terminal for Verifone Payments by connecting to Wi-Fi or Ethernet, pairing with a PIN or QR code, and managing connections. ### Prerequisites All passwords mentioned in this article are set up and given by the Verifone team during deployment. To change or access them, get in touch with your Salesforce Customer Service Representative. It is recommended to turn off the "IDLECARDENTRYENABLED" parameter for the terminal. - Press 1+5+9 twice to access Sysmode. - Go to **Supervisor**, enter the password, and go to **Administration**. - Select **Configuration Editor**, then **config.usr1**, and **\[reg\]**. - Add a new value and input the parameter name "**IDLECARDENTRYENABLED**". - Set the value to "**n**", press **Enter**, and reboot the terminal. ### Wi-Fi Connectivity - Press 1 + 5 + 9 at the same time to open the Terminal Menu. Go to **Com Control** and select **‌Wi-Fi**. ![The Communicaiton Panel of the Verifone Terminal.](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_custom_verifone_screen.png) - ![Tip](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/images/icon_tip.png) Tip Customize the idle screen of the payment device, such as displaying marketing images directly on the Verifone portal. - ![Note](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/images/icon_note.png) Note If there's no previously configured network on the terminal, the Wi-Fi option will show as Down. - Tap **Wi-Fi** and then **Configuration**. Enter your admin password to continue. ![The Password Entry screen on the Verifone Terminal.](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_verifone_passwd.png) - Inside the configuration menu, tap **Wi-Fi Scan**. This will start a network discovery on the terminal. After the scan is completed, you'll be presented with a list of all the Wi-Fi networks detected by the terminal. ![The Wifi Scan Option on the Verifone Terminal](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_verifone_wifi_scan.png) - Look for your network name on the list. Be sure you have good network strength (the number in the brackets indicates how strong is your signal network on the terminal). - Tap your network's name in the list. The next screen shows you the details of your network. Tap **Add**, which opens the Authentication menu. In the menu, select the option **Preshared-Key (PSK)**. Enter your network's password. ![The PSK button in the AUthentication section of the Verifone Terminal.](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_terminal_config_psk.png) - After entering the network password, you'll be directed back to the **Authentication** menu. The **Preshared Key (PSK)** section now shows that the password has been set. Tap **Save**, and after you get a screen confirmation, tap **OK**. If asked to apply the settings, tap **Yes**. ![The PSK section shows that the password is set.](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_verifone_psdk_set.png) ![The screen showing the PSK password is saved.](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_verifone_tap_ok.png) ![The screen asking if you want to apply the PSK settings on the interface.](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_e285_pass_apply.png) - Wait for the configuration process to complete. After you get the interface started, confirm, and tap **OK**. Return to the Communication Panel and check the **Wi-Fi** option. The status shows **Up**. Select the Wi-Fi option, and then **Status**. Here, you can find the IP for the terminal and the name of the network to which it is connected‌.![The interface started confirmation on the Verifone Terminal](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_e285_started.png)![The Wi-Fi showing as "up" on the Verifone Terminal."](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_e285_wifi_up.png)![The Verifone Terminal showing the Wi-Fi's IP address](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_e285_status.png) - ![Tip](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/images/icon_tip.png) Tip In case you still see the Wi-Fi status as Down in the Communication Panel after correctly configuring your network, try starting the Network interface again. You can do that by tapping on the Wi-Fi option inside the Communication Panel and then selecting the option Start Network Interface. ### Ethernet Connectivity ![Note](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/images/icon_note.png) Note This applies to the M400 model only. To connect to a LAN network, connect an ethernet cable from your router to the terminal. To check the status of the network, press 1 + 5 + 9 to open the Terminal Menu. Go to **Com Control** and select the option **LAN**. If the terminal is connected, the status shows as Up. To check the connection details, tap the **LAN** section, and then tap **Status**.![The Verifone Terminal showing the ethernet is conencted.](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_m400_lan_up.png) ### Connect Verifone Payments to Modern POS Go to the POS app's **Device Manager** to manually add the Verifone Payments terminal. Tap **Add Terminal** in the **Terminal** section, this opens a new screen to enter the terminal IP.![THe POS App prompting you to add the IP address of the Verifone Terminal.](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_connect_verifone_pos.png) ![Important](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/images/icon_important.png) Important If connecting with the POS app, both the terminal and iPad shall be connected to the same network. ### PIN Pairing Enabled on Terminal If the terminal attempts to connect for the first time to the POS app, a basic pairing PIN exchange process is needed. After entering correctly the terminal's IP, a new screen will be shown with the instructions to proceed.![The POS App prompting you to enter a code on Verifone Terminal to link the devices.](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_terminal_pairing.png) - To complete the pairing, enter the PIN on the terminal.![The Verifone Terminal prompting you to enter the PIN.](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_e285_enter_code.png) - ![Important](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/images/icon_important.png) Important While pairing, always exit back to the home screen, otherwise, the code entry screen won't be presented until you go back to it. - ![Note](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/images/icon_note.png) Note Upon the pairing process starting, there's a timeout of 30 seconds to enter the pairing code in the terminal. After the time expires, the terminal's screen will reset and the POS will show an error alert with the message "**Cancelled by Timeout**". Tap on the terminal IP in the Device Manager to restart the pairing process. - If the PIN is correct, the terminal shows a confirmation screen:![The Verifone Terminal showing that the PIN matches.](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_verifone_pin_match.png) ### PIN Pairing Turned Off on Terminal If the pin for pairing is turned off on the terminal (refer to Disable pin entry for pairing section below) the interaction between the terminal and the POS, if the connection attempt happens, won't involve the PIN exchange. However, an alert still prompts the PIN to be entered. The difference is that the connection proceeds automatically (no PIN needs to be entered on the terminal), with the terminal showing immediately the **PIN MATCH** screen. On the POS app side, the terminal now shows as connected.![The POS App showing that it's connected with the Verifone Terminal.](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_pos_app_verifone_connected.png) ### QR Code Pairing - For pairing via QR Code, press 1 + 5 + 9 to open the Terminal Menu. Go to **Com Control** and select the option **Wi-Fi** or **LAN** depending on your configuration. Select **Status** and open the QR Code.![The Verifone Terminal showing the QR Code button.](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_qr_code_pairing.png) - On the **Device Manager** screen, select the barcode to scan the terminal's QR Code.![The POS App prompting you to add the terminal's IP address, and the QR Code used to add that IP address.](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_pos_app_qr_code.png) ### Disconnect from Terminal The app disconnects from the terminal if the WIFI/Ethernet connection drops. This can happen for multiple reasons (terminal was rebooted, iPad or terminal's Wi-Fi was switched off). ### Reconnect to Terminal When Payment is Initiated If, for some reason, the WIFI/Ethernet connection gets dropped (terminal rebooted; iPad or terminal's WIFI was switched off), the app will disconnect the terminal and show the option to connect to it again on the Device Manager screen. ### 1:N Topology 1:N Topology is supported by Verifone for app builds 9.5.1 or greater. For more details on setting up 1:N topology in a CMS, refer to [this article](https://help.salesforce.com/s/articleView?id=commerce.rt_cms_hardware_topology_setup.htm&release=264.0.0&type=5 "Point of Sale's Printer and Payment Terminal Topology allows you to determine whether the application is paired with a printer or payment terminal one-to-one (1:1) for an extended period of functionality or whether it's one-to-many (1:N) where it is prompted each time to select the device to use.").![In Search Settings, configure 1:N topology](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_verifone_term_printer_topology.png) After a terminal is successfully paired, the POS saves the Terminal name and IP address locally. Then the POS uses this data to show all previously connected terminals in the 1:N terminal selection prompt. Users can select a terminal to pair with and proceed with the initiated terminal operation. ![Note](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/images/icon_note.png) Note If the IP address of the terminal changes from what was previously saved, selecting the Terminal entry in the 1:N selection prompt will result in a connection failure. If that occurs, delete the entry for the terminal in the Device Manager and repair it with the updated IP address. ## Verifone Terminal - Accessing SysMode Use SysMode to update terminal settings and configurations. Access advanced terminal configuration updates, such as disabling line item display or request pin for pair. The SysMode menu allows advanced terminal configuration updates. If using this menu settings like line item display or request pin for pair can be enabled/disabled on-line help To access the sysMode menu, press 1 + 5 + 9 twice in the terminal.![Accessing the Supervisor user in sysMode.](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_e285_sysMenu.png) Select the "**Supervisor**" user and enter the password to start sysMode. ### Updating Terminal Settings Using SysMode Depending on the configuration, change ‌the administration panel or the terminal configuration. This section outlines both flows. ### Updating settings on the Administration Panel On the Main menu, select the Administration option. Then, go to the specific section in which the setting to configure is set.![The Administration panel on the Verifone Terminal.](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_verifone_settings_admin_panel.png) ### Updating settings in Terminal Configuration To enter the configurations menu, go to **Administration > Config Editor**. Tap the "config.usr1" option.![The Config Editor in the Verifone Terminal's Administration section](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_config_editor.png)![The config.usr1 option in the Verifone Terminal's Config Editor.](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_verifone_term_configusr1.png) This opens the editor for the terminal configuration file, in there new values can be added to update the behavior of the terminal. Depending on the configuration to be set, scroll down on the screen to the option \[**perm**\] or \[**reg**\], tap it, and if this prompts a confirmation alert, tap **YES**.![The perm option in the config.usr1 section of Verifone Terminal.](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_verifone_term_perm.png)![The reg option in the config.usr1 section of Verifone Terminal](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_verifone_term_reg.png)![A confirmation alert from Verifone Terminal to set the user's permissions.](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_verifone_term_config_yes.png) Afterwards, any supported configuration can be updated in the terminal, adding the corresponding key and value. ![Note](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/images/icon_note.png) Note If adding values to these sections, the keyboard type can be set to lowercase, uppercase, and numbers using the # button of the terminal. There are many configurations that can be set directly on the terminals to affect their behavior and the way they interact with the modern POS. The next sections will outline the configurations needed for the modern POS to work correctly and some additional ones that will only affect the way the associates interact with the terminals. ### Mandatory Configurations This section will list the set of configurations needed to be set on the terminals for the POS to work properly. ### Disable Partial Authorization The current integration of the modern POS doesn't support partial authorization, so this needs to be turned off at the terminal level. To turn off this functionality, follow the instructions described on Updating settings on Terminal Configuration section to get into the configuration editor and in there, add a value for **PARTIALAUTH**\_ on the \[**reg**\] section, assigning it to **0**.![Add the PARTIALAUTH value to the config.usr1 settings.](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_verifone_partialauth.png)![Setting the reg section to 0 for the config1.user](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_verifone_term_set0.png) Reboot the terminal, the next time a payment is started the partial auth won't happen. Instead, the transaction is approved or declined ### Disable Line Item Display By default, terminals have been configured to show the line item screen before proceeding with a payment. Follow the instructions described on Updating settings in Terminal Configuration section to get into the configuration editor. To turn off this functionality, add a value for **LINEITEMDISPLAY** in the \[**perm**\] section, assigning it to **0**.![Set the lineitemdisplay value in the config.user1 settings.](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_verifone_lineitemdisplay.png) ![Setting the value of perm to 0.](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_verifone_lineitemdisplay_zero.png) Reboot the terminal, the next time a payment is started the line item screen won't show. ### Disable Pin Entry for Pairing By default, terminals have been configured to ask for a PIN if a connection is started by the POS. To turn off this functionality, follow the instructions described on Updating settings on Terminal Configuration section to get into the configuration editor and in there add a value for **AUTOPAIR** on the \[**perm**\] section, assigning it to **1**.![Adding the autopair value to the perm section in the config editor.](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_harfware_disable_pin_verifone.png)![The perm setting assigned a value of 1 in the config editor.](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_disable_pin_verifone_perm.png) Reboot the terminal, next time a connection is started with the terminal, the POS will show the pin-entering message, but will be automatically dismissed and the pair will be established. ### Exit SysMode To exit from the SysMode menu and return back to the terminal, tap to the left upper guillemet, this will open a new menu. Tap on the **Run Apps** option, this will reset the terminal and return it to the default state.![The menu with the options to reset the Verifone Terminal.](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_exit_sysmode.png) ## Verifone Terminal - Troubleshooting Troubleshoot common issues with Verifone terminals in Point of Sale to quickly resolve problems. ### Terminal Reboot If the Verifone terminal screen is stuck due to network issues or other issues, the fallback solution is to reboot the terminal. This can occur if the line item display doesn't get cleared or if the screen shows "payment successfully captured" but remains stuck. - Press 1+5+9 to open the terminal menu - Go on Control Panel > Power Panel > Restart - This will reboot the terminal ### Network Diagnostics Run diagnostic tests on Verifone Payments terminals to check the terminal's connectivity. Press 1 + 5 + 9 to open the Terminal Menu. Go to **Com Control** and select the option **More**. Go to **Diagnostic > Troubleshoot** and tap **Full Test**. After the test is completed, check for the results. ![The full test option in the Diagnostic section of Verifone Terminal](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_e285_test.png) ![The Full Results section of the Diagnostics section of the Verifone Terminal](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_e285_test_result.png) ### Initialization Failure This error can happen if you connect to a new terminal or if you start the POS again and try to connect to a connected terminal.![An initialization failure message in the POS App](https://sf-zdocs-cdn-prod.zoominsoftware.com/tdta-commerce-retail-264-0-0-production-enus/17d647fb-8988-49fb-9add-c4f4cc79c9e4/retail/images/rt_cms_hardware_pos_app_initialization_failure.png) If this error appears: - Verify the terminal is on. - Verify that both iPad and terminal are connected to the same network. - If the previous points were verified, try to reconnect to the terminal again by tapping on Connect on the Device Manager screen. ### Terminal's preexisting configurations being cleared if an update is pushed into the terminal If Verifone pushes updates or fixes directly into the terminal,‌ the configurations set before this push are cleared. It is recommended to review the values configured on the terminal after the push and set them again if needed.